What our Customers say about us

At CPM we recognise that repairing rotating equipment when the customer needs it, to a reliable standard and at a cost which doesn’t break the bank is vital when equipment fails but that’s only part of the story. Ensuring the maximum life of the repair is where there are big savings to me made.

We can say all we like about our services but the only people whose opinions we value – and learn from – are our customers. So instead of the predictable “we-are-the-best” article, we have decided to showcase some examples of why our customers chose us, and let them have a say about how great we are.

Most of our customers have been with us for over 15 years. Why? Here are some examples:

1 £20k saved on high volume blowers by avoiding repairs and focusing on maintenanceAerzen blower catastrophically failed causing case damage and resulting in replacement blowers being purchased at a cost of £29,000 each. By implementing Route Cause of Failure procedures, calculating MTF, production trials, and having spares stored offsite, we contributed to savings of £20k.
2 £4k saved with Insulated BearingsAfter receiving a number of motors from a Paper Converter with obvious signs of pitting on the bearings, CPM identified it was being caused by an old V.S.D. Insulated bearings were fitted to the motors which have been performing satisfactorily ever since. Within 3 years, an estimated £4000 was saved in unnecessary overhaul costs.
3 Shaft Seal upgradeIn the early days of one of our maintenance programs with a customer, it was identified via Asset Failure Reports that many rotating assets were failing as a result of the ingress of water and/or product via the drive end seal. CPM investigated this and began a programme of replacement of standard seals with phosphor bronze bearing isolators. Failures quickly reduced.
4 Roller Bearing upgradeWe investigated the repeated failure of dryer fan motors and identified excessive axial load exerted by the fan on the drive end of the motor. The situation was rectified by replacing the standard ball bearing by a roller bearing resulting in a significant reduction in failures.

These examples attest to our commitment to being a solution provider, not a one-off supplier. These long-lasting relations take time and most of all, trust.

Don’t just take our word for it, the best possible recommendations come from the people with first-hand experience of what we’re like to work with – our customers. Read this short digest of recent feedback, and discover more about the effectiveness of our approach and our results.

quotes Perfect, experienced team, just what we wanted. Nothing comes to mind that could be improved upon. I’ll be glad to have the same team working on my next jobs which are already being arranged.Engineering Supervisor (Germany)
quotes No complains and very happy with CPM so far. Especially as they have shown that they can work over weekends!Plant Engineering and Maintenance Manager – Packaging company
quotes We were very impressed with the CPM engineers work on site, the motor is working perfectly, and they were able to work to the strict procedures and codes we have here with no problems. We will definitely call CPM back to site when we need engineering support in the future.Engineering Supervisor – leading European Pharmaceutical Manufacturer
quotes I would like to take this opportunity to thank you and all your team there for all their efforts and hard work over the last couple of weeks to get this gearbox back to me as soon as possible. I really do appreciate it.Engineering Supervisor – Confectionary Manufacturer (North West)
quotes Firstly many thanks for the excellent service that we received last night. I have to say, the service that I have received from both Ian and Mark has been exceptional (thanks guys!!!!). Once again – many thanks for your service and response to our need. Thanks and best regards.Engineering Manager – Global Pharmaceuticals Company (North West)
quotes Excellent service provided through an excellent network of staff, always helpful, honest and willing to try their best to help.Maintenance Engineer – International Chemical Manufacturer

At CPM Engineering, a fundamental part of our work philosophy, is to help our customers make more informed decisions about their rotating equipment. By giving them ‘best practice’ advice and options we feel that we can earn their trust and maintain our reputation.

If you would like to know more on how we can assist you, please get in touch, we will be happy to help.

Facebooktwittergoogle_plusredditpinterestlinkedinmailby feather